With BEURER BC58 blood pressure monitor (Germany), you can check your own blood pressure quickly and easily.
Warranty: 36 Months
Purpose of self-measurement of blood pressure:
With BEURER's BC58 Blood Pressure Monitor (Germany), you can check your own blood pressure quickly and easily.
– Know how high or low your blood pressure is, to change your lifestyle, take care of your diet and see if blood pressure lowering medication is effective or not;
– Tell your doctor the results of your blood pressure measurement so that he or she can adjust your medication and maintain blood pressure at an acceptable level;
– To prevent serious consequences when blood pressure suddenly increases, such as stroke, kidney failure, visual impairment due to retinal damage...
Therefore, you need to regularly measure your blood pressure at home regularly
With BEURER's BC58 Blood Pressure Monitor (Germany), you can check your own blood pressure quickly and easily. Just press the button, the machine will automatically adjust the inflation pressure based on hand size and blood pressure fluctuations, and select the ideal deflation speed, minimizing discomfort when measuring blood pressure. In particular, the machine also has the function of detecting arrhythmia and classifying blood pressure based on WHO blood pressure norms pre-installed in the machine.
In particular, the BC58 blood pressure monitor connects to the computer using Beurer HealthManager software to view results reports on the computer.
1. Instructions for using the BC-58 wrist blood pressure monitor
1.1. Wearing the cuff:
Place the device on your left wrist so that it is positioned inside the wrist (see picture).
Make sure your wrists are not caught by sleeves or towels.
Wrap the cuff around your wrist and adjust it so that the top edge of the device is about 1cm away from your ankle. The cuff should be wrapped tightly around the wrist but not too tight.
2. Correct measuring posture:
Sit in a comfortable position, place your hands on a support point and bend your arms so that your wrists are at heart level. You can also lie down to measure but make sure the cuff is at heart level.
Before measuring, you need to rest and relax for about 5 minutes.
Do not talk or move while measuring.
2.1. Blood pressure:
– Push the touch screen activation button (button 5) to the ON position.
– Press the on/off button to start the machine.
– After all the icons are briefly displayed on the screen, the newly used memory will be displayed (U1 or U2). To change memory, press the MEM button, then confirm with the on/off button. If no button is pressed, the newly used memory will automatically be used after 5 seconds.
– Before measuring, the screen displays the results of the most recent measurement. If there are no results stored in memory, the display shows 0.
– The cuff will automatically be inflated to approximately 190mmHg.
– Once the necessary level has been reached, the cuff pressure automatically decreases, and the screen will display a beating heart.
– If the pressure in the cuff is not enough, the device will automatically pump more to have enough pressure to measure.
– Finally, the blood pressure and heart rate measurement results will be displayed on the screen. Measurement results will automatically be saved to memory.
Note: You can stop the measurement process at any time by pressing the on/off button or pushing the touch screen activation button (button 5) to the OFF position.
If the machine displays an error message, turn off the machine, review the measurement instructions and error messages, how to fix it, and then re-measure.
The machine will automatically turn off after 1 minute of non-use. However, to save battery life, you should turn off the device after each measurement by pressing the on/off button or pushing the screen activation button to the OFF position. Wait at least 5 minutes before taking the next measurement.
3. Technical specifications of BC-58 wrist blood pressure monitor
– Measurement method: Measure wrist blood pressure fluctuations, for wrists with a circumference of 140 to 195mm
– Measuring range:
+ Blood pressure: 0 – 300mmHg
+ Systolic blood pressure: 60 – 260mmHg
+ Diastolic blood pressure: 40 – 199mmHg
+ Heart rate: 40 – 199 beats/minute.
- Accuracy:
+ Maximum blood pressure: ± 3mmHg
+ Minimum blood pressure: ± 3mmHg
+ Heart rate: ± 5% of measurement results
– 2 user memories, capacity of 60 results saved per memory
– Power source: 2 1.5V Micro batteries (Alkaline type LR 03)
– Battery life: About 300 measurements depending on blood pressure level or inflation pressure
4. Clean and preserve the BC-58 wrist blood pressure monitor
– Only clean the blood pressure monitor carefully with a damp cloth
– Do not use soap or solvents to clean
– In any case, do not get the machine wet (water will get inside and damage the machine).
– Do not place heavy objects on the machine.






